Item 1, does not concern me. with respect to 2 & 3, how did you setup extensions.conf? Did you set it up for zoiper? Thanks, Bob k6ecm 73 Sent from iPad
On Jun 1, 2017, at 6:55 PM, Steve Siesel <steve@siesel.net> wrote:
All,
Here is what my problems are:
1. Getting the following in my asterisk trace:
[Jun 1 21:33:22] WARNING[587] chan_iax2.c: REGISTER-LOG: registry rereqquest [Jun 1 21:34:12] WARNING[588] chan_iax2.c: REGISTER-LOG: Sending registration request for '46031' [Jun 1 21:34:12] WARNING[580] chan_iax2.c: REGISTER-LOG: registry rereqquest
However my iax2 show registry shows: DMRLink*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 46031 47.203.114.127:1025 60 Registered
2. I have port forwarded both udp and tcp 4569 to the Allstar node. I have also added the following to iax.conf for Zopier access:
[k4ksa] username=steve type=friend context=myphone host=dynamic auth=md5 secret=xxxxxxx disallow=all allow=ulaw allow=g726aal2 allow=gsm codecpriority=host transfer=no ;callerid=K4KSA
I have also added the context to extensions.conf as well.
This is what I am getting in the asterisk trace when trying to register (also getting error 29 from Zopier)
[Jun 1 21:35:35] NOTICE[585] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127) [Jun 1 21:35:37] NOTICE[582] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127) [Jun 1 21:35:40] NOTICE[585] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127)
3. Telephone access from Allstar. When using the dial in telephone number trying to get voice or function access it times out with a busy signal. I did a tcpdump port 4569 and I can see the telephone service making It to the machine:
21:43:29.564494 IP seal.lambdatel.com.iax > DMRLink.home.iax: UDP, length 96 21:43:29.565075 IP DMRLink.home.iax > seal.lambdatel.com.iax: UDP, length 65
Using RAT RC1
Anyone have any thoughts to my three problems?
Steve K4KSA
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.