I rebooted it and it worked again, I just don't want that happening when my system is permanent and running, it would get annoying having to ssh and reboot (at least restart asterisks) every time that happens, especially if I have to SSH remotely while I am gone. On Mon, Jul 7, 2014 at 8:34 PM, Bob <kk6ecm@gmail.com> wrote:
Looks like it is online now, running just fine.
------------------------------
*From:* Skyler F [mailto:electricity440@gmail.com] *Sent:* Monday, July 07, 2014 6:12 PM
*To:* Bob; app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Error 1
My node has been running fine until now, and it just died with error 1.
Here are my messages
[Jul 7 19:10:08] WARNING[8463] acl.c: is not a valid IP
[Jul 7 19:10:08] WARNING[8463] app_followme.c: No follow me config file (followme.conf), so no follow me
[Jul 7 19:10:08] NOTICE[8463] app_queue.c: No call queueing config file (queues.conf), so no call queues
[Jul 7 19:10:08] WARNING[8463] cdr_csv.c: unable to load config: cdr.conf
[Jul 7 19:10:08] NOTICE[8463] chan_agent.c: No agent configuration found -- agent support disabled
[Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: Starting AEL load process.
[Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: AEL load process: calculated config file name '/etc/asterisk/extensions.ael'.
[Jul 7 19:10:08] NOTICE[8463] pbx_ael.c: File /etc/asterisk/extensions.ael not found; AEL declining load
[Jul 7 19:10:08] NOTICE[8488] app_rpt.c: Normal Repeater Init 40764
[Jul 7 19:10:08] WARNING[8493] chan_usbradio.c: Loaded parameters from usbradio_tune_usb40764.conf for device usb40764 .
73
KDØWHB
On Wed, Jul 2, 2014 at 12:48 PM, Bob <kk6ecm@gmail.com> wrote:
Yes. I’m using
...
power=5
height=1
gain=3
dir=0
server1=server1.echolink.org
server2=servers.echolink.org
server3=nawest.echolink.org
server4=backup.echolink.org
#includeifexists custom/echolink.conf
It may only use the first three... don’t know.
------------------------------
*From:* Skyler Fennell [mailto:electricity440@gmail.com] *Sent:* Wednesday, July 02, 2014 11:33 AM *To:* Bob; app_rpt-users@ohnosec.org
*Subject:* Re: [App_rpt-users] Error 1
Do I select the server on the echolink conf file?
On Jul 2, 2014, at 8:47 AM, "Bob" <kk6ecm@gmail.com> wrote:
I’ve had trouble with server2 for echolink. Recommend deleting and select another from the list.
Bob
kk6ecm
------------------------------
*From:* app_rpt-users-bounces@ohnosec.org [ mailto:app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org>] *On Behalf Of *Skyler F *Sent:* Wednesday, July 02, 2014 7:29 AM *To:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Error 1
I guess it didn't remember the stuff from yesterday, this is all it had today
[Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40764 [Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40930 [Jul 2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm@gmail.com> wrote:
For sure Asterisk is not happy. A shot... sounds like the computer lost your URI/FOB USB address when it lost power. Need to reset using lsusb to identify address and reset devstr= parameters in the USB tune file. I’ve also had this problem when the network settings are not correct, but would bet on the devstr perameters.
Bob
kk6ecm
------------------------------
*From:* app_rpt-users-bounces@ohnosec.org [mailto: app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Skyler F *Sent:* Tuesday, July 01, 2014 4:15 PM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] Error 1
I know it is probably on the archive a lot of places, but I am experiencing Error 1 sometimes.
It is sometimes right off the bat when I reboot the system, sometimes not. I had it before, and I decided to reinstall from scratch.
Is there anything i can do about this? The only thing I could think that may have led to this is the power cord accidentally coming loose once when the computer was on.
Asteriscks died with error code 1
Automatically restarting
Asteriscks died with error code 1
Automatically restarting
Asteriscks died with error code 1
Automatically restarting
ETC........................
Thnks for any help.
Skyler Fennell
amsatnet.info
KDØWHB
electricity440@gmail.com
--
Skyler Fennell
amsatnet.info
KDØWHB
electricity440@gmail.com
--
Skyler Fennell
amsatnet.info
KDØWHB
electricity440@gmail.com
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com