Greetings, I have a strange problem. I am going to discuss the problem then I am going to tell what I have done to fix it. Right now I am running 2 USB CM108 Fobs. Fob 1 (repeater) is on my 27539 repeater. Fob 2 (weather radio) is on 27540. Also I am running IAXRPT on 27541. Now here is the problem. When fob 2 is rxing. I can here that rx on all the tx lines going out. So the output to the repeater radio can hear fob two. 27541 can also hear fob two receiver. There is what I have done to try and fix this. I have moved fob1 to another usb port. Same result. Also moved the fob2 to another set of usb ports on the motherboard. But I did notice something. If the usb fob is not linked in asterisk is not heard anywhere. But once I have simpleusb-tune-menu place the usb fob on a port, I can hear it everywhere. Any ideas? I would really like to run 3 fobs. But if I can not get 2 fobs to work I am stuck. Ryan KB8PMY