hi all, we are running an USB Stick for that here. Stick -> http://www.ebay.de/itm/USB-Sensor-Thermograph-Thermometer-Temperatur-fur-PC-... Monitoring -> http://www.t08.net/index.php/db0pob-kalvarienberg Innenraumtemperatur = Indoortemperature, date in DDMMYYYY, 24h time, temp data in °C Aussentemperatur = Outdoortemperature, date in DDMMYYYY, 24h time, temp data in °C greetings from germany dh6mbt torben ________________________________ Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von Doug Crompton [doug@crompton.com] Gesendet: Mittwoch, 19. März 2014 15:42 An: Bob Roszkowski Cc: app_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] DMK URI GPIO temperature sensor There are bits available on the DMK but I don't think there is any implementation of them in app_rpt? I suppose one could write code to do it but there are easier already implemented ways. What I use to measure temperature is the one wire interface. It is supported in Linux. You need a one wire to USB adapter and the temperature sensors are single chip and can be daisy chained over a fairly long distance. The sensors are cheap. You could put together a single sensor system for less than $30 and most of that would be the adapter. http://www.hobby-boards.com/store/products/1%252dWire-USB-Adaptor.html 73 Doug WA3DSP http://www.crompton.com/hamradio ________________________________ Date: Wed, 19 Mar 2014 01:20:51 -0500 From: bob@w5evh.org To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] DMK URI GPIO temperature sensor Group, Does anyone know if it is possible to measure sensors like temperature, battery voltage, and S readings remotely using the URIs GPIO pins? My air conditioner in my cabinet at the repeater site decided to freeze up making it very hot in the cabinet. Would like to be able to monitor it. Another option is to plug something in to the USB port to monitor temperature and have the node able to notify if it falls outside the parameters set. Has anyone done this? thanks boB - W5EVH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.