I really like the idea of ctcss decoding on the fly. I I use simpleusb I will loose that and will have to provide ctcss decoder for my msr2000, the more stuff in a system , the more chance of having problem. Since the URI and software are already in the system why not using it to there full potential? the pc is a P4 2.66 ghz. it have way more power then needed. -----Message d'origine----- From: K&R Yoksh Sent: Saturday, March 30, 2013 12:10 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Something is rotten in the state of Denmark(Ken) ----- Original Message -----
From: "Ken" To: "'George Csahanin'" Subject: Re: [App_rpt-users] Something is rotten in the state of Denmark
I think this is a case of YMMV ? I find if I enable DSP squelch with the low-noise receiver, the squelch operation on weak signals is somewhat erratic. With strong signals it?s fine.
I'm just reading this thread, so forgive me if I missed something, but can you use COS and filtered, muted audio rather than discriminator audio and DSP? Personally, I prefer the former, especially when using Motorola 16-pin radios, where all of the signals you need are already at the rear panel. With this configuration, you can use SimpleUSB and lower your CPU usage by not running the DSP routines. I agree that sometimes the weak signal squelch detection isn't as accurate as COS. 73 Kyle K0KN Allstar 2210-2219 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users