I may state the obvious here, but do you have valid entries in the *.conf files? Rpt.conf points to a valid interface, e.g. usbradio or simpleusb, and the appropriate modules in modules.conf ‘load’ed to ‘no load’ for the chosen configuration? Are there ‘valid’ entries in the corresponding tune file? Thanks, Bob k6ecm 73 Sent from my iPhone
On Nov 20, 2017, at 7:27 AM, mca555@mac.com wrote:
Hi Bob,
The PS command shows the process running. I can successfully stop and restart it. The ‘COMM OK’ LED on the RA-35 is dark. The ‘HB’ LED is on solid versus flashing, which I expect. Thanks! Mark
What are the indicators asterisk is running, but not talking to the RA-35.
Bob
Sent from iPad
On Nov 19, 2017, at 2:08 PM, mca555 at mac.com wrote:
Hi,
I’m trying to build a simple AllStar node using a Pi3 with an RA-35 interface. Maybe I’m using the wrong documentation. The FAQ says to do the initial login with “repeater” and “allstarlink”. This didn’t work for me. I poked around and found that earlier versions used “root” and “debian”. That worked, but didn’t run the firsttime script. I managed to get firsttime script to run manually. The Allstar service appears to be running but won’t talk to the RA-35. I did confirm that the hardware is functioning by successfully installing “that other” allstar build. Anybody have a clue as to the error in my ways?
Thanks! Mark
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.