Setting up a hub is easy - you just configure a standard install to use rxchannel = Zap/pseudo instead of USB. You don't need any USB config files. The problem is on the Echolink side. Because of limitations inherent in E/L, you cannot run two E/L nodes behind the same router. If your friend has two IP addresses, it would work; but not with a single IP. With two IP's you would conference the two systems together on the E/L side. For a single IP, what you need to do is move the radios to the asterisk system and run the E/L node from there (i.e., all on one PC). Then it will work seamlessly. Of course, that means you need a radio interface that works with Asterisk.... 73/GL Ken 27021/27061/28204 522456 Echolink W4BRM-B DSTAR
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Ken Robinson Sent: Sunday, June 10, 2012 4:46 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Allstar hub and Echolink
Hi All, A friend has asked me to help him set up an Allstar hub, I'm having difficulty find documentation so set up a hub, but I'm not sure that what he wants to do will work.
At the moment he runs an Echolink node and would like to upgrade to Allstar but using Allstar as a hub (no radio interface) is it possible to run the hub on a different pc to the Echolink pc and if so how would the two pc's talk to each other
Thanks
Ken G0lce Node 28468
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users