Bruce Forestal wrote:
I've been working with iaxrpt on a laptop running Win2K and a Mac running Fusion/Win2k. I've got TX/RX audio and PTT working on both but I can't seem to get the DTMF to pass over the network to the Asterisk node. I can hear the DTMF tones coming out the local laptop speaker. I am using the alt-number keys to generate DTMF. Also the DTMF keypad does not generate tones although I can see the text appear below the pad so I know at least clicking the pad keys with the mouse is working.
Thanks, Bruce Forestal wb6are@gmail.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
What do you mean by "pass DTMF"? Ley me meak a (rash) assumption that you want the tones to come out of the transmit port. The keys in iaxrpt do not send any DTMF over the Internet connection, instead, it sends out of band commands representing the dtmf digits. app_rpt does not normally convert these into back dtmf tones when it receives them from iaxrpt, instead it trys to make sense of what was sent to see if a valid command can be parsed. That is not to say that that the out of band commands cannot be re-converted back into DTMF in app_rpt, but you have to tell it explicitly to do that. If you are interfacing app_rpt to a multiport analog repeater controller used in an RF linked system, you probably want to experiment with the following settings in the node stanza. duplex = 0 ; No duplex, no response propagate_dtmf = yes ; Propagate non-function DTMFdigits linktolink = yes inxlat = #56,#57,0123456789ABCD ; string xlat radio port to sys outxlat = *7,*0,0123456789#ABCD ; string xlat from link to sys All of these with the exception of propagate_dtmf are documented at http://app-rpt.qrvc.com/node/83 propagate_dtmf sounds like what you need to enable, but it probably won't work as you want it to without the other settings as well. Steve WA6ZFT