Steve Gladden wrote:
Have a node setup (repeater) with usbradio.. Using mostly default setup. at the moment I have rx /repeater setup for carrier access (no ctcss)
Been testing this and the far end nodes report that they get get repeater tones & hang time from me if I try to just 'monitor' them using the *2 monitor functionality..
*3 works as expected but when I try to use *2 I'm getting those unexpected results and the far end is experiencing some grief/confusion.
Am I misunderstanding how this should work? Or are there any common gotchyas where you'd think you're just monitoring but it's doing more than that? Sorry this is a bit vague.. I probably need to bring up another note and test this and report step by step what's happening.
Thanks
Steve
Versions of app_rpt.c which are older than version 0.199 might be sending telemetry to foreign nodes under some conditions, especially if the foreign node is running a really old version of app_rpt.c which does not use the new keying scheme. You should check what version of app_rpt.c you are running and see if the foriegn node is running a really old version of app_rpt.c Steve WA6ZFT