I'm working hard to get a basic AllStar system running, and struggling to find a suitable USB Fob to modify (trying to do it on a budget) I've been unable to get hold of the exact model shown in www.qsl.net/kb9mwr/projects/voip/usbfob-119.pdf, but now have several of a very similar one with the printed description 'Virtual 7.1Ch Sound' and a slightly translucent case. lsusb reports the device as 'ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter.' which I think might be CM119 or similar. When plugged in the green led starts to flash, but I've not yet been able to get any audio out of it - even when running 'rpt fun <node> *80' from the Asterisk CLI I wanted to confirm this was a suitable fob before going to the grief of modifying - it's much more SMT than in the above PDF, and you can't actually access the pins on the chip itself as it's under a 'bubble' of a ceramic compound. Any advice would be gratefully received. -- Jim M0HPJ.