you are correct. IAXRPT allows you to select what node you are "sending DTMF digits" to in the node number (account) window (the same one you use to select which node to connect to). JIM WB6NIL
From: dpowellwilliams@shaw.ca To: app_rpt-users@ohnosec.org Date: Sun, 7 Aug 2011 12:38:01 -0700 Subject: [App_rpt-users] Remote Command Mode with Iaxrpt
I have noticed that I cannot use Iaxrpt to send remote commands to a linked node using the *4 <node_number> syntax.
Remote commands entered via DTMF or the console (rpt fun <nodename> <command>) work fine.
Commands to the target node via a direct Iaxrpt connection also work.
However, if the target node is a remote base, only one connection is possible, so remote commands are necessary to make changes when the remote base node is connected to a standard node.
My rpt.conf file does include the necessary settings for link_functions.
I have asked Steve H about this but he is too busy to look at it for the moment.
Anybody have any experience with using Iaxrpt for remote commands?
73,
Dave VE7MQ.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users