All, My original message regarding submittals for nodenames.tar.gz was missing some important information. The nodenames.tar.gz contains asterisk sound files which are spoken in lieu of the node number during connect and disconnect messages. For example, without nodenames.tar.gz unpacked in /var/lib/asterisk/sounds/rpt, you might expect to hear a message like "Node 2000 connected to node 2010". With nodenames.tar.gz unpacked in /var/lib/asterisk/sounds/rpt you would hear the following message instead: "Ocean Beach Hub connected to WA6ZFT La Mesa". Note that the node numbers are replaced with node names. The way this works is app_rpt looks for a file whenever it has to say a node number in the directory /var/lib/asterisk/sounds/rpt/nodenames. If it finds a file name stem/prefix matching the node number, (e.g. 2000.ulaw) it plays the file instead of saying the node number. Specs: These messages should be as short as possible. And encoded in 14 bit ULAW at a sample rate of 8KHz. The audio level should be normalized to 32 percent of full level, You total file size should not exceed 50 kilobytes. Cooledit is a good suggested program to use to generate these files. I hope this clears up any confusion caused by the original message. I will be taking submissions for audio files until 6/6/08. Steve Rodgers WA6ZFT