-----Original Message----- From: mike@midnighteng.com [mailto:mike@midnighteng.com] Sent: Saturday, August 08, 2015 12:36 PM To: Jamey Wright app_rpt-users@ohnosec.org <jamey.wright@charter.net> Subject: RE: [App_rpt-users] I/O using parallel port
8401=cop,61,pp2=0 8411=cop,61,pp2=1
The commands you created in rpt.conf is the definition. Use them directly or in a macro for complex function. Read online manual http://ohnosec.org/drupal/node/177 ...mike/kb8jnm I have read the manual... and every website I can find dealing with this and I cannot make it work. I don't know what I am missing but there is something. Just for a sanity check, I built a LED circuit and connected it to the parallel port. If I set it to "pp2 = out0" in simpleusb.conf the LED is not lit. If I change it to "pp2 = out1" the LED is lit so I know the port is working. For whatever reason, I cannot control those pins from DTMF or sent from IAXRPT. This is from rpt.conf: [functions27981] <snip> 8401 = cop,61,pp2=0 8402 = cop,61,pp3=0 8403 = cop,61,pp4=0 8404 = cop,61,pp5=0 8405 = cop,61,pp6=0 8406 = cop,61,pp7=0 8407 = cop,61,pp8=0 8408 = cop,61,pp9=0 8411 = cop,61,pp2=1 8412 = cop,61,pp3=1 8413 = cop,61,pp4=1 8484 = cop,61,pp5=1 8415 = cop,61,pp6=1 8416 = cop,61,pp7=1 8417 = cop,61,pp8=1 8418 = cop,61,pp9=1 Maybe I am misunderstanding the way to setup and use the commands. My understanding is that I should be able to just dial *8411 and set pp2 to 1? Thanks Jamey WR4JW