Hi Tony, This (by far) is the most straightforward "how to" thanks to N9YTY. I'm a few hours behind you, and if dl.allstarlink.org wasn't down I'd have built Asterisk by now! http://f1.grp.yahoofs.com/v1/gB-QSBv7MyXnnmNOKErZRj5QMT49_fK5Hmw-jC7G-E2MnfP... There is a bit of a "gotcha" in the new tm version, in that you can't disable EchoLink. Scott is adding this feature in the next couple of days, but I found it easier to just setup the Echolink info even through I had no intention of using it. So here I have rtpDir_tm + IRLP + Echolink... and very shortly Asterisk. 73 Jon G7PFT Asterisk Repeater Controler wrote:
I've finally got Asterisk running, and it is registering with the AllStar network. Only problem is getting the local side working. At this time, I am not running any local radio hardware, just want to run a nailed up link using chan_rtpdir.
Does anyone have any pointers for setting up this configuration. I am currently running version 0.2 of the driver, but can easily upgrade to 0.5 (and the have appropriate upgrade ready for the other end). Just didn't want to change too many things at once. :)
73 de VK3JED http://vkradio.com
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt