Not sure exactly. The MASTR II has a TS-32, and the audio comes from “audio filter output” on the TS-32, which is driven by the MASTR II “VOL SQ HI” and from there is where it gets messy, as there appear to be errors in the schematic which indicates it is wired to the PTT, in one part of the schematic, and “SPkR H” in another part. I think they have some pi numbers miss labeled in the schematic. Thanks, Bob K6ECM 73
On Jun 1, 2018, at 2:21 PM, Mike <mm@midnighteng.com> wrote:
Are you using discriminator audio, line audio or speaker audio ?
...mike/kb8jnm
On 6/1/2018 5:19 PM, Bob Pyke wrote: When I set usbradio.conf rxdemod=flat ; the audio out of the repeater sounds muffled compared to the audio while listening to the repeater input with a monitoring radio. When rxdemod=speaker ; the audio out of the repeater sounds tinny compared to the audio input to the repeater.
Is there a way to “select” something in between in software?
Thanks, Bob K6ECM 73
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.