1 Nov
2017
1 Nov
'17
4:04 a.m.
It's as configured. 40821 = radio@127.0.0.1:4578/40821,NONE ; 224.280 41618 = radio@127.0.0.1:4578/41618,NONE ; 443.525 42032 = radio@127.0.0.1:4578/42032,NONE ; 927.050
Isn't the syntax @{ip-address}:{port}/{node-number} ??? This means all 3 "nodes" are listening on the same inbound port - and that would seem to be a possible cause of what's happening. From what I remember, each node has to have a different port defined in the config, and that should be referenced in the nodes section - even if they are all on the same server - otherwise, the system has no way of knowing which node is being connected to. Jeremy, NQ0M