PS. and dont forget the 'frog' command :-) JIM From: telesistant@hotmail.com To: njgarbenis@gmail.com; app_rpt-users@ohnosec.org Date: Sun, 21 Aug 2011 11:32:51 -0700 Subject: Re: [App_rpt-users] Beagleboard/Lox chan_beagle follows the so-far consistent device specification methodology (Asterisk CLI command) of <device-type> active <device-name> for chan_beagle, and your chan_beagle device named 'beagle1234' it would be: beagle active beagle1234 for chan_simpleusb, and your chan_simpleusb device named 'fred42' it would be: susb active fred42 for chan_usbradio, and your chan_usbradio device name 'usb5678' it would be: radio active usb5678 [since chan_usbradio did this first, I think you can see the reasoning by which the particular syntax was chosen :-) ] Also, you can do <device-type> active (with no device specified) to see which is currently "active" (selected). JIM WB6NIL
From: njgarbenis@gmail.com Date: Sun, 21 Aug 2011 14:27:21 -0400 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Beagleboard/Lox
I have a beagle board setup with the Lox board using both ports. When I use beagle tune to adjust audio it only works with port a. How change this to adjust port/node b
Neal
Sent from my iPhone _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users