Hi Jeff, I have TX A level set to 600 and TX B level also set to 600. I tried moving them around and it didn't seem to change much until I put them really low and things got quieter. I thought it was all links but I just tried using echolink to connect in and I sounded pretty good so I'm starting to second guess myself. I will try connecting somewhere else and let you know how it goes. Thanks, Andy KK4ZKP Sent from my iPhone
On Mar 27, 2015, at 19:08, Jeff Carrier <k0jsc.jeff@gmail.com> wrote:
Is every different node you connect to is much too low? If so I'd guess that you have your audio level too hot. How did you set your RX and TX levels?
On Fri, Mar 27, 2015 at 4:34 PM, Andy Wittman <kk4zkp@gmail.com> wrote: Hello All,
I am curious to know if there is a setting I can adjust to increase the volume of audio coming in from a link. My rx and tx levels are good, when turning on parrot mode everything sounds great, but when I link in to a repeater, the incoming audio is very low. On the other side of the conversation I receive good audio reports from my side.
I am using a simplex node running on the BBB with a Baofeng 888. I switched it and my HT to WFM but the linked audio is still very low.
Thanks in advance, Andy KK4ZKP _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.