The APRS-IS password could be generated using the callpass utility that comes with xastir. Bogdan - YO3IIU
I would like to set up my allstarlink system to report position information to the aprs system.
Can someone tell me how to set up this password? Also, are the default server and port listed in the example below what should be used? I have searched the aprs site and couldn't find who to request this information from.
Chuck Henderson, WB9UUS
; Configuration for app_gps ; [general]
call = wb9uus-2 ; callsign (including SSID) for APRS purposes*password = 12345 ; Password for APRS-IS server for above callsign* comment = AllStar Node 27468 ; Text to be displayed associated with this station*server = second.aprs.net ; APRS-IS server to report information to**port = 10151 ; port on server to send data* icon = r ; A CAR (default) Icon do be displayed for station on APRS display (see below) comport = /dev/ttyS0 ; Serial port for GPS receiver (specify this only if using GPS receiver) baudrate = 4800 ; Baud rate for GPS receiver (specify this only if using GPS receiver) ;debug = y ; set this for debug output freq=442.700 ; Display Frequency of station tone=107.2 ; CTCSS tone of station (0.0 for none) lat=40.508 ; Fixed (default) latitude in decimal degrees lon=-88.988 ; Fixed (default) longitude in decimal degrees elev=123.4 ; Elevation of Antenna in Meters (*NOT* HAAT) power=9 ; Power level (see below) height=5 ; Antenna Height in HAAT (see below) gain=8 ; Antenna Gain (see below) dir=0 ; Antenna Direction (see below)
On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
There have (obviously) been some changes/improvements made to the Echolink and APRS/GPS subsystems within app_rpt.
Included in these is the ability for a node to report its "fixed" GPS coordinates to the APRS network, even if it does not have a GPS receiver connected.
Please see the following:
Setting up Echolink Connectivity http://209.159.155.200/drupal/node/56
Setting Up APRS and GPS Configuration http://209.159.155.200/drupal/node/179
Of course, the latest copies of app_gps and chan_echolink need to be downloaded from the SVN.
JIM WB6NIL
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users