I have a RC-210 running a Vertex repeater on port 1 and port 2 is a DMK URI. The controller is about 4 years old but I flashed the latest firmware before the install about a month and a half ago. I don't have any random disconnect issues. I suggest you flash the controller to default and upgrade the firmware. This gives you a known starting place with no scheduler activities or other things that someone else might have done before you. Kevin Custer
I think Arcom is aware of the problem, but I do not know the fix or if there is. I sold my arcom and don't get the emails from the yahoo group anymore. I would post there and see if there is a solution.
I came to the same conclusion as Bob, ditch the Arcom! LOL
Monty
On Wed, Feb 1, 2012 at 9:38 AM, Fran <baldwin88@yahoo.com <mailto:baldwin88@yahoo.com>> wrote:
My problem is that Im geting random port disconnects. Ive checked everything and thought I might be missing something somewhere. The way im setup is Port 1 (Repeater), Port 2 (Allstar Link), Port 3 (IRLP). I link port 1 to Port 2, then I link Port 1 to Port 3. Arcom RC210 controller with Firmware rc2105_2844.
Frank