Gosh.. gee... I would have NEVER guessed that he was asking that..... If you adjust your LOCAL audio levels properly, THIS SHOULDNT HAPPEN!!! In no way, shape or form, should there be a reason to have to adjust the levels (inbound or outbound) of other Allstar links. Everyone adjusts their levels to the same standards. That, in telecom terms, is called a VNL (Via Net Loss) plan (for transmission levels). We have one. We use it. It works. If what you are talking about is OTHER networks, such as connections from Echolink, TLB, etc, that is another story...... Jim WB6NIL From: wd0ekr@msn.com To: telesistant@hotmail.com Subject: Re: [App_rpt-users] Incoming link connection volume Date: Mon, 26 May 2014 08:50:46 -0600 I think he is asking how to adjust the audio level of the signal coming in over the internet, I would like to know how to do that also. The local audio levels are fine but the incomming internet audio is high ----- Original Message ----- From: Jim Duuuude To: kk6ecm ; app_rpt mailing list Sent: Monday, May 26, 2014 8:45 AM Subject: Re: [App_rpt-users] Incoming link connection volume Sounds like you dont have your rx/tx (local) levels set properly. Jim
From: kk6ecm@gmail.com
Date: Mon, 26 May 2014 03:43:40 -0700
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Incoming link connection volume
Is
there a way to adjust the incoming volume of a connected link? Some connections seem to over drive the transmitter? Normal repeater function works quite well.
Thanks, Bob kk6ecm
Sent from iPad
_______________________________________________
App_rpt-users mailing list App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To
unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.