Good news - some struggle over. I just built two fresh ASL nodes, updated, upgraded - private for now. Now I want one of my working ASL/public nodes to also be accessible as a private node. I assume for both the existing public node and new separate private node all I need to do is... In /etc/asterisk/rpt.conf on the existing node, add lines: [nodes] ; 1085 is the new/added private node number for existing public node1085 = radio@127.0.0.1/1085,NONE,y ; 1002 is the new private node1002 = radio@192.168.10.96/1002,NONE,y In /etc/asterisk/rpt.conf on the new private node (same network), add lines: [nodes] ; 1085 is the new/added private node number for existing public node on same LAN1085 = radio@192.168.10.76/1085,NONE,y ; 1002 is this new private node 192.168.10.96 on LAN)1002 = radio@127.0.0.1/1002,NONE,y What if any additional context/extension or other parameters need to be setup in which file?? What else do the nodes need to know about each other to communicate and establish connection? What am I missing? I should be able to issue a connect from 1002 to 1085, and vice versa - yes?