Lu, All of my radio adapters still use the CM119A chips. While they are not pin for pin compatable with the URI, I feel they work well and have a superior feature set: http://www.repeater-builder.com/products/usb-rim.html For use with the GM300, you might take a look at the RIM_Lite that plugs directly in the back of that radio: (RIM Maxtrac) http://www.repeater-builder.com/products/usb-rim-lite.html Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 On 5/10/2019 10:26 PM, Lu V wrote:
It’s been about 10 or 12 years since I ordered a URI and I just ordered one as I ran out of them and it came as a URIb version. I didn’t even notice it until I started investigating while I was having trouble with reaching sufficient discriminator level and pin 21. I’m using Kenwood next edge repeaters and I have several of them. I’m finally getting around in adding a node to my Marathon Florida repeater and discovered the hard way that the URIB will not work properly I called and found out that they change the chipset and it is not as sensitive. Just wanting if anyone else had experienced this and what the resolution might be? I tried testing a URIb on a gm300 and found that it just barely had enough level. It actually warns you but it does work. There needs to be an alternative or they need to fix this because I can see this being a showstopper for a lot of people.
Lu Vencl KA4EPS _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.