Loren, Yes it's a known issue. There is a problem with the init scripts. The next version uses systemd. If you want to convert to systemd now see <https://github.com/N4IRS/AllStar/tree/master/systemd> Careful reading of the README.md may yield another solution. 73, Steve N4IRS On 08/31/2016 06:24 AM, Loren Tedford wrote:
Greetings I have found an issue today on a pure dial install out in a Data Center environment where service asterisk stop and service asterisk start did not work.. Anyone else having these issues with Dial?
Here is some other commands i tried instead.. root@hub:/etc/init.d# ./asterisk status ● asterisk.service - LSB: Asterisk PBX Loaded: loaded (/etc/init.d/asterisk) Active: failed (Result: exit-code) since Wed 2016-08-31 05:56:34 EDT; 22min ago Process: 19146 ExecStop=/etc/init.d/asterisk stop (code=exited, status=0/SUCCESS) Process: 19289 ExecStart=/etc/init.d/asterisk start (code=exited, status=1/FAILURE)
Aug 31 05:56:34 hub.kc9zhv.com <http://hub.kc9zhv.com> asterisk[19289]: Asterisk is already running. /etc/init.d/...w. Aug 31 05:56:34 hub.kc9zhv.com <http://hub.kc9zhv.com> systemd[1]: asterisk.service: control process exited, code...s=1 Aug 31 05:56:34 hub.kc9zhv.com <http://hub.kc9zhv.com> systemd[1]: Failed to start LSB: Asterisk PBX. Aug 31 05:56:34 hub.kc9zhv.com <http://hub.kc9zhv.com> systemd[1]: Unit asterisk.service entered failed state. Hint: Some lines were ellipsized, use -l to show in full. root@hub:/etc/init.d# ./asterisk forcestart Usage: /etc/init.d/asterisk {start|stop|restart|reload|force-reload} root@hub:/etc/init.d# ./asterisk force-reload [....] Reloading asterisk configuration (via systemctl): asterisk.serviceJob for asterisk.service failed. See 'systemctl status asterisk.service' and 'journalctl -xn' for details. failed! root@hub:/etc/init.d# ./asterisk reload [....] Reloading asterisk configuration (via systemctl): asterisk.serviceJob for asterisk.service failed. See 'systemctl status asterisk.service' and 'journalctl -xn' for details. failed! root@hub:/etc/init.d#
As you see above i still received failures to stop and start asterisk using even this method
Any thoughts?
Anyone had any luck porting any of this to centos 7?
Considering making it part of a nethserver project i have been working on..
Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> http://www.lorentedford.com <http://www.lorentedford.com/> http://www.kc9zhv.com <http://www.kc9zhv.com/> http://forum.kc9zhv.com <http://forum.kc9zhv.com/> http://hub.kc9zhv.com <http://hub.kc9zhv.com/> http://Ltcraft.net<http://ltcraft.net/> http://voipham.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic