One more question... I'm figuring things out as I go along here. So far this is pretty cool! In rpt.conf the idtalkover parameter isn't strongly documented. My guess at it's function is to play a morse code ID underneath the repeated audio if a long-winded user has the repeater keyed up and the ID timer expires completely. So, I set idtime=6000 and then I held the receiver open for well in excess of 6 seconds, but it did not play any morse code I under the audio. I tested several cycles transmitting >6 seconds and it always plays the ID file in tail but never ID's when the timer expires during a transmission. Could somebody enlighten me either to what this parameter really does or show me if I'm using it incorrectly? Thanks, Mark Hagler