Good Evening All, I have just finished up a new server and node install but I am running into an issue. My node (27981) shows connected (Green) on the AllStarLink status page but I can't connect to the Web Transceiver. When I click on the node number in the list and it goes to the Web Transceiver page everything loads but it does not connect. If I click on the 'connect' button, nothing happens. My node is behind a Cisco firewall but I have an outside address NATed to the IP of the node PC and port mapping configured to have UDP/4569 translated to UDP/4569. I also have the correct settings in the access list to allow the traffic. I also have SSH on 222 configured the same way and it works fine. I'm guessing there is a config in a file somewhere that I either missed or mis-configured. Thanks in advance. Jamey WR4JW