Not fully understanding all the data you provided, The first stuff that comes to mind would be to check duplex mode and then your TX logic may be inverted AND backwards. You might take a moment to think what I said through. I don't have time for a long post. Just a few for your punch-list. ...mike/kb8jnm ----- Original Message ----- From: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org> To: <app_rpt-users@lists.allstarlink.org> Cc: Sent: Wed, 25 Oct 2017 20:02:29 -0400 Subject: [App_rpt-users] issues with Rx audio Gm300 Repeater Good Evening all, I figured I would reach out to all of you too see if anyone can help. Setup: Gm300 Rx and Tx radios DIAL Controller USB interface: RA-40 using usbradio.conf The issue I am having is with the RX audio ( i think) is not coming though on the tx side of the repeater. I know the tx audio is set right, since i can hear the announcements and they are clear. So I took apart the RX radio and move the jumper to position A, so its not de-emphasized audio. Things that i have done with Radio-tune-menu Item #2: Rx squelch set to 543 Item#9 Success Setting=0.436243 meas=7089.0 I tried running Item #3 but didnt seem to get it to work, not sure what I am really suppose to do with that. If anyone can help, please do. Otherwise not sure what the actually numbers mean from item #9, might help my brain to understand whats going on if i knew what those numbers actually represented. So if anyone can help me out, it would a great help to me as i have been beating my head against this problem for a couple days. Thanks -- Joshua Mucinski Jamucins@mtu.edu [1] 616-826-2976 Mechanical Engineer Michigan Technological University Alumi Ham Radio Operator Extra Class - KE8CPD I'm good on QRZ [2] KE8CPD Allstar Hub [3] W8LRC [4]GRgives [5] Links: ------ [1] mailto:Jamucins@mtu.edu [2] https://qrz.com/db/KE8CPD [3] http://44.103.33.85 [4] http://w8lrc.org [5] http://grgives.com/