If your node is behind a firewall, it sounds like you don't have ports 5198 and 5199 udp forwarded into your node. If your node sits out on a public IP, make sure your upstream ISP doesn't filter on those ports. Jim / K6JWN On Aug 14, 2009, at 11:47 AM, Todd Birkenholtz wrote:
Thanks Jim I will change my rpt.conf to rxchannel = Zap/pseudo
Any Idea on why no audio in my inbound Echolink connections?
My echolink inbound connection looks like this.
In extensions.conf
[radio-secure] exten => 2345,1,Answer exten => 2345,n,Playback(tt-weasels,skip) exten => 2345,n,Hangup
*CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189 do_new_call: new CALL=W0IOU,ip=204.13.148.184,name= Todd -- Executing [2345@radio-secure:1] Answer("echolink/el0-12", "") in new stack -- Executing [2345@radio-secure:2] Playback("echolink/el0-12", "tt-weasels|skip") in new stack -- <echolink/el0-12> Playing 'tt-weasels' (language '') -- Executing [2345@radio-secure:3] Hangup("echolink/el0-12", "") in new stack == Spawn extension (radio-secure, 2345, 3) exited non-zero on 'echolink/el0-12'
Thanks
On Fri, Aug 14, 2009 at 12:58 PM, Steve Zingman <szingman@msgstor.com> wrote: Todd Birkenholtz wrote:
Fellow Hams and PBX tinkerer's
I want to provide a auto-patch and a repeater dial-in for our club repeater using my existing home Asterisk PBX in a Flash setup. Our club repeater is connected to Echolink so I was thinking about creating a Echolink node on my server that users could link to then I would allow an outbound call. On the reverse I would like to provide a repeater dial-in number that would route through my Asterisk server to our club's node via Echolink. Keeping in mind at no time does my Asterisk server actually communicates with a radio directly it is just acting as a Echolink gateway.
I have been experimenting with ACID but it appears the radio/usb driver is preventing Asterisk from loading without a actual usb radio connected. If I noload=chan_usbradio in the modules.conf file then Asterisk appears to load but I am still having problems with refrence to it in my rpt.config file.
I have been able to configure a Echolink connection but I cant send audio to the connected node when the remote station connects but the Asterisk debug indicates it is. Does anybody have a working Echolink node that they would like to share their iax,echolink,rpt and extensions config file with me.
Todd, Set rxchannel = Zap/pseudo in place chan_usb in rpt.conf You will not need the hardware.
73, Steve N4IRS _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users