Try a "rpt stats +node#" like below. Then key up and do it again. Is the Signal on input following your radio? Huntington*CLI> rpt stats 2530 ************************ NODE 2530 STATISTICS ************************* Selected system state............................: 0 Signal on input..................................: NO System...........................................: ENABLED Parrot Mode......................................: DISABLED Scheduler........................................: ENABLED ..... -- Tim :wq On Nov 7, 2011, at 5:20 PM, Little Denver wrote:
We set it up on simplex, from what i can tell the web setup is correct. i checked the cabeling again, all pins are correct. wiring matches dmk website as well as the ft-60 manual. im really at a loss here
On Mon, Nov 7, 2011 at 7:54 PM, Tim Sawyer <tim.sawyer@me.com> wrote: That means that you are not getting audio into the node. Recheck all your settings on the web setup and your wiring.
What about half duplex, dud tiy set it up that way? -- Tim :wq
On Nov 7, 2011, at 4:51 PM, Little Denver wrote:
Just did that, no tones show up. Just traffic from echolink, a directory download.
On Nov 7, 2011 4:28 PM, "Tim Sawyer" <tim.sawyer@me.com> wrote: Did you make the node half duplex when you set it up on the site?
Login and do "asterisk -rvvv". That puts you at the asterisk DLI with verbose level 3 or better. Then make touch tones from the remote radio to the node radio and you should see the touchtones on your screen.
-- Tim
On Nov 7, 2011, at 3:55 PM, Little Denver wrote:
So my dad and i are trying to get a mini itx setup for the 5th wheel so he can use it when he travels. We set up the information on allstarlink's web site, installed acid, got the download and config file done, connected the uri ( green light is flashing ), followed the schematic for connection frs/grms so we could use a spare ft-60 ( since he is just going from his pickup to the 5th wheel ) booted up the machine and are unable to get any return commands. the node shows to be active, 28134. we can communicate from one radio to another, but nothing is returned. even when we request time or system info. any help advice or trick would be greatly appreciated
-- Thanks & 73, Denver Little KF5EFG
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- Thanks & 73, Denver Little KF5EFG