30 Nov
2017
30 Nov
'17
12:53 a.m.
On 11/29/17 7:07 PM, Jesse Lloyd wrote:
I suspect that if you get a packet collision using the 10 Mbps 1/2 duplex then the delayed packet used for timing breaks things... this is a guess at this point.
What kinda of switch do you have this connected to? A proper switch should eliminate any collisions. I have an EX everything plugs into, and you will need to set the RTCM to full duplex and manually configure the switch to 10/full. The RTCM doesn't do auto negotiation, and the switch will default to 10/half if it fails (this is the 802.3 standard) 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net