Crank your RTCM squelch pot 4-5 turns past the threshold. I have a voted system that was doing the same thing. Also make sure your ctcss line from the receiver to the rtcm. I had one of the ctcss output lines programmed wrong when I was setting it up and everything was CSQ. On Sun, Mar 29, 2015 at 11:01 AM, Bryan Fields <bryan@bryanfields.net> wrote:
I believe he's using the RTCM, so the usbradio commands will not work.
On March 29, 2015 12:33:30 PM EDT, Ken <ke2n@cs.com> wrote:
There are two squelch tails. One in the user’s receiver which can be eliminated by using tone squelch and turning off the PL some time before dropping the carrier. Some commercial rigs respond to the reverse phase tone burst. That is unusual in amateur rigs I think. And some amateur rigs require the tone to be turned off longer that the app_rpt default. This all has to do with the squelch tail being generated in the user’s receiver.
But if you want the *repeater* not to transmit a squelch tail - from its own receiver - then you need:
Rxsquelchdelay in usbradio.con
as previously discussed in :
http://ohnosec.org/pipermail/app_rpt-users/2014-April/009175.html
for example
rxsquelchdelay=50 ; delayline in ms, carrier squelch tail eliminator
this requires use of the usbradio channel driver.
73
Ken
*From:* R. Wayne [mailto:allstar@controlservers.net] *Sent:* Sunday, March 29, 2015 1:34 AM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] Squelch Tail Elimination
After relocating our MSF 5000 to a new location and adjusting the squelch as low as we could reliably go we noticed that we have a squelch tail. Our coordination requires that we don’t. It appears that the MSF has a fixed squelch tail elimination method an no control other than cranking up the squelch again. This is surprising since we use PL encode / decode. I would think that the PL would mute as soon as the user unkeys.
With this said is there anything in Allstar that would help with this situation?
Wayne
------------------------------
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Bryan Fields 727-409-1194 http://bryanfields.net
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.