I periodically experience the following error on the RPi3 with DIAL (/var/log/asterisk/messages). Any clues? The repeater uses a URIx, and the Linux address for the USB is the same as devstr= in usbradio_tune_usb.conf ERROR[537] chan_usbradio.c: HID process has died or something!! [Nov 12 13:17:07] NOTICE[538] chan_usbradio.c: Assigned USB device 1-1.2:1.0 to usbradio channel usb [Nov 12 13:17:07] WARNING[538] chan_usbradio.c: Loaded parameters from usbradio_tune_usb.conf for device usb . [Nov 12 13:17:07] WARNING[537] chan_usbradio.c: Possibly stuck USB read channel. [usb] [Nov 12 13:17:07] WARNING[537] chan_usbradio.c: Nope, USB read channel [usb] wasn't stuck after all. [Nov 12 13:38:16] ERROR[537] chan_usbradio.c: HID process has died or something!! [Nov 12 13:38:16] WARNING[520] app_rpt.c: rpt_thread restarted on node <# redacted> The 21 min delay from the prior message is typical. After the error, it restarts asterisk, and the startup macro reconnects the repeater. Thanks, Bob k6ecm