Jim; Thanks for the quick reply! I am considering these as an option on a more "mission critical" system. that uses mdc 1200 a lot.. Looks like I may need to order a pair and test.. J In this case I just need to pass MDC1200 end to end.. So do not need app_rpt to process it, just pass it.. Sorry for the 2 questions wrapped in one! Doug KD8B From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Monday, June 11, 2012 2:55 PM To: kd8b@thebades.net; app_rpt mailing list Subject: RE: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? No fair.. thats 2 separate questions :-) :-). 1) I can pretty much assure you that no one has ever tried the MDC1200 thing. I would be interested in seeing the results. I think the "voter test" CLI command would probably an easy way to test this. 2) 2 (or more) RTCM's can not talk to each other directly. However, the channel driver and/or app_radbridge is capable of providing "transparent" bridging between RTCM's (and non-RTCM radio devices too). So, there has to be a host somewhere, however, it does not have to be in an "app_rpt" configuration. Jim _____ From: kd8b@thebades.net To: app_rpt-users@ohnosec.org Date: Mon, 11 Jun 2012 14:07:48 -0400 Subject: [App_rpt-users] MDC 1200 over RTCM Voter Possible?? I am curious if anyone has set up rtcm's and used mdc1200 over them especially during a vote??? And I am pretty sure the answer is no, but can 2 RTCM ( non voted direct link) units talk to each other directly without a Host ALLStar Link system. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users