HI, I have installed the Node with ACID and test it using the iAXRPT software. There are my some questions: 1) As PTT control for iaxrpt is using the Ctrl button. when i pressed and then release the Ctrl button there is a delay in between i mean red light on URIx (delay in going red and the off). 2) As it runs with asterisk. Can i call from normal softphone or ip Phone (i.e: IP Phone) Using SIP standard to the Node connected with iax RPT. Is that possible. 3) Or what is the basic purpose of this node setup. Is that only for use repeater mode? Kindly i am bit confused about this. I will be grateful if anyone can answer to my questions. Regards, Salik Mumtaz Satti, A-EXEN National Radio And Telecommunication Corporation, Haripur Pakistan www.nrtc.com.pk salik.satti@nrtc.com.pk Contact: +923155414048 Skype: salik.satti6 On Friday, November 14, 2014 1:01 AM, Doug Crompton <doug@crompton.com> wrote: #yiv2686584581 #yiv2686584581 --.yiv2686584581hmmessage P{margin:0px;padding:0px;}#yiv2686584581 body.yiv2686584581hmmessage{font-size:12pt;font-family:Calibri;}#yiv2686584581 Salik, I think you need to give us more information. What kind of problems are you having? Is it just with the DMK URI or Allstar in general? The DMK URI's green LED should light up at boot and if you type at the Linux prompt 'lsusb' you should see it listed. That would be your first step. It should look like this. The C-media device is the DMK URI. You may have other USB devices present also. [root@WA3DSP_Allstar ~]# lsusb Bus 001 Device 001: ID 0000:0000 Bus 001 Device 002: ID 0d8c:013a C-Media Electronics, Inc. Bus 002 Device 001: ID 0000:0000 If that seems OK then when you start Asterisk and everything is configured properly the green LED should blink at about a 2pps rate. As far as your node is concerned, have you received a node number and password from allstarlink.org? If you have questions about the configuration files I am sure someone here could help you. Also have you considered using the Beagle Bone Black for your node? I am not sure if that is available in your country or how easy it is to get but it is much easier to setup and use. If you had all the hardware you could have it setup and running in 10 minutes or less. The DMK URI would be the most expensive item and you already have that. You can view the web page at: hamvoip.org 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Fri, 14 Nov 2014 04:27:35 +0000 From: saliksatti@yahoo.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Installation And configuration of URIs with asterisk app_rpt Hi All, I want to use DMK URIs with asterisk. But i am facing issues regarding installation and configuration of a node with ACID. Please help me in this regard. Thanks in advance. Salik Mumtaz Satti, A-EXEN National Radio And Telecommunication Corporation, Haripur Pakistan www.nrtc.com.pk salik.satti@nrtc.com.pk Contact: +923155414048 Skype: salik.satti6 _______________________________________________App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.