ensure the module chan_usbradio.so is loading in /etc/asterisk/modules.conf ensure that rxchannel = radio/usb_NODNUMBER in /etc/asterisk/rpt.conf you also need to make sure the file usbradio_tune_usb_NODENUMBER.conf exist in /etc/asterisk and edit the file replacing the default node number 1999 (most likely) with your node number. Then you should be able to run radio-tune-menu On Tue, Jan 1, 2019 at 2:10 PM larry <larry@n7fm.com> wrote:
Kevin & Mike,
Did I miss another response somewhere?
It appears to me Mark has the noload=chan_usbradio.so commented out so shouldn't it load automatically upon reboot of the system? As a suggestion I would then stop the loading of chan_simpleusb.so to avoid any conflicts.
My other question is how has he configured USB and does it match the same port each time the device is plugged in.
Larry - N7FM
; Module Loader configuration file ;
[modules] autoload=yes ;noload=chan_voter.so*;noload=chan_usbradio.so* ;noload=chan_irlp.so ;noload=chan_echolink.so ;noload=chan_simpleusb.so noload=app_hamvoip.so
;noload=res_crypto.so ;noload=func_callerid.so noload=chan_oss.so noload=chan_alsa.so noload=chan_phone.so
On 1/1/19 9:33 AM, Kevin Custer wrote:
In looking at your config (quickly) it looks like you aren't loading chan usb in the modules.
Kevin
On 1/1/2019 12:25 PM, Mark DuMoulin wrote:
Kevin,
I downloaded ASL 1.01 and had the same issue as with the RC.19 When I try to use it asterisk fails claiming to not find the chan.
I'll put it back in and try again to give you feedback.
Tnx! Mark
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Nathan Hardman nhardman1428@gmail.com N8THN@ARRL.NET