Hi, I have been trying to create a bootable Micro-SD card with pickle.img for a BeagleBoard-Xm, but not having any luck. I have tried writing the image from WinXP (with dd), from Mac OSX and from RHEL6. It takes about an hour to write the image no matter which platform - with the same result. It doesn't work.My last attempts have been on RHEL6. Below is the output from fdisk after writing the image. It shows both partitions and that part 1 is marked as bootable. But the device will not mount on RHEL, not will it boot the BeagleBoard. Can anybody lend a clue as to where I'm going wrong? Command (m for help): p Disk /dev/sdd1: 3948 MB, 3948102144 bytes 255 heads, 63 sectors/track, 479 cylinders, total 7711137 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015d60 Device Boot Start End Blocks Id System /dev/sdd1p1 * 63 144584 72261 e W95 FAT16 (LBA) /dev/sdd1p2 144585 7727264 3791340 83 Linux Thanks, Kevin W8KHW