I am trying to get a Single RTCM with no GPS to work in simple mode. Does there need to be a gps for a timing source even if I am not using the voting function at all? I am getting this error in asterisks- WARNING[2368]: chan_voter.c:4511 voter_reader: Voter client master timing source mobile1 attempting to authenticate as mix client!! _____________________ Here is my voter.conf- [general] port = 667 buflen = 500 password = DCA [1995] buflen = 800 mobile1 = DCAradios,transmit,nodeemp ________________________ Here is my rtcm conf- 1 - Serial # (1223) (which is MAC ADDR 00:04:A3:00:04:C7) 2 - VOTER Server Address (FQDN) (192.168.1.27) 3 - VOTER Server Port (667), 4 - Local Port (Override) (0) 5 - Client Password (DCAradios), 6 - Host Password (DCA) 7 - Tx Buffer Length (3000) 8 - GPS Data Protocol (0=NMEA, 1=TSIP) (0) 9 - GPS Serial Polarity (0=Non-Inverted, 1=Inverted) (0) 10 - GPS PPS Polarity (0=Non-Inverted, 1=Inverted, 2=NONE) (2) 11 - GPS Baud Rate (4800) 12 - External CTCSS (0=Ignore, 1=Non-Inverted, 2=Inverted) (1) 13 - COR Type (0=Normal, 1=IGNORE COR, 2=No Receiver) (1) 14 - Debug Level (4294967040) 15 - Alt. VOTER Server Address (FQDN) () 16 - Alt. VOTER Server Port (Override) (0) 17 - DSP/BEW Mode NOT SUPPORTED 18 - "Duplex Mode 3" (0=DISABLED, 1-255 Hang Time) (1/10 secs) (255) 19 - Simulcast Launch Delay (65535) (approx 200 ns, 5 = 1us, > 0 to ENA SC) Thanks, Richard Bopp Kc0npa