I built a through hole voter board and interfaced it to a GPS 18 LVC and my server. I set the board up as a master, transmit. The LED shows the GPS locked and 98 command shows the GPS, but I am getting the following error when telnetting into the board: Warning: GPS Data time period elapsed. The error is timestamped and occurs every second. I made sure the data format was NMEA per archived messages on here by connecting the GPS to SNSRCFG. The config appears to be set up correctly. What other areas do I need to look at to fix this warning? I did notice you can choose quite a few NMEA messages in the SNSRCFG profile. Does it matter if all are checked? I have a second issue with updating the firmware. The board is at Rev 1.41. I tried updating it, but haven't had any luck so far. Nothing happens when I click on the "capture target" button after resetting the voter board. The target ip is the voter board and the bootloader ip in the voter is my laptop with ENC_Loader. The IC(s) were originally programmed by a friend in another state so I never experienced what it take to do the initial programming. Thanks for your help, Corey