The portal has a port in it and that’s where you used to specify the port for the rpt_extnodes file to resolve the incorrect reported port. From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Sunday, August 12, 2018 12:06 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] BIG registration problem this morning Both asterisk and tcpdump show the wrong port being reported. Sometimes NAT routers get confused. Could you try rebooting your router? On Sun, Aug 12, 2018 at 8:39 AM Paul - KN2R <paulkn2r@gmail.com <mailto:paulkn2r@gmail.com> > wrote: I have all set and been using port 44569 for well over a year on that server. Now this morning the registration server is reporting the incorrect port number of 54799. I Never used that number. Now inbound connections are not working any more. Paul -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org <mailto:app_rpt-users-bounces@lists.allstarlink.org> ] On Behalf Of Bryan Fields Sent: Sunday, August 12, 2018 11:27 AM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] BIG registration problem this morning On 8/12/18 9:11 AM, Paul - KN2R wrote:
This morning ALL my nodes are somehow reporting wrong AllStar port numbers from Registration server. Every one of them.
A search shows port 54799, shown below for my node 27034.
But the actual port I have defined everywhere is and should be 44569!
Where did that 54799 number come from? All my incoming connections are down at this point.
From the server:
iax2 show peer 27034 * Name : 27034 Description : Secret : <Set> Context : radio-in Parking lot : Mailbox : Dynamic : Yes Callnum limit: 0 Calltoken req: No Trunk : No Encryption : No Callerid : "" <> Expire : 45018 ACL : No Addr->IP : 76.101.48.66 Port 54799 Defaddr->IP : (null) Port (null) Username : Codecs : (gsm|ulaw|alaw|g726aal2|adpcm|slin|g729|speex|ilbc|g726|g722|siren7|siren14| slin16) Codec Order : (ulaw|alaw|siren14|siren7|g722|slin16|slin|g726|g726aal2|adpcm|gsm|ilbc|spee x|g729) Status : Unmonitored Qualify : every 60000ms when OK, every 10000ms when UNREACHABLE (sample smoothing Off) You're registering with that port number. Can you check your bound port number? Thanks, -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP