Gurus! Can I operate arbitrary recievers and transmitters with the voter boards, and separate them in config at chan_voter? Background: Our terrain does not lend itself to a few high-sited duplexed repeaters (or rather we are not inclined to pay for it), so we are taking the non-duplexed distributed approach of locating recievers and transmitters at various sites on a non-contending basis and GPS locking them all together. It seems to us that if we have a hole in some coverage, that it would easy (read - cheap) to throw another GM300 at the problem.. That is, site A has either a 6M transmitter and other 2M receiver, or otherwise non-contending combinations, and the corresponding pair for each repeater receiver or transmitter is actually located on a nearby site linked with 802.11an. SO! It looks at first glance that I must use a VOTER board for each rx AND each tx, but perhaps I can use some clever config and halve the number of VOTER boards I use. Many thanks, Steve -- Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers +64 21 040 5067