Hi, Le 14/04/2016 05:22, mike@midnighteng.com a écrit :
Your complaint of echolink experience should be directed at echolink. Nobody here can control or enforce poxy's proper handling.
It's not a complaint about Echolink ;-) It's a question about the Echolink channel driver for app_rpt. The purpose was to see if other people are experiencing the same problem, or if I'm the only one having this problem (which would imply a problem in my configuration)...
Your CT settings are all in rpt.conf
unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ; Use unlinkedct if only connected to a local node
&
[telemetry] ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
So you might just look at your config for the node and see what CT is the 4 beeps and look for that setting in the node stanza.
That's the problem : none of them has 4 fast high frequency beeps. I also created a "dummy" tone which is easy to recognize (400 Hz during 2 seconds). I put this to every ct I found in rpt.conf. And I still hear 4 (or 5) very fast high frequency beeps when Echolink node is conected to the hub !!! I was wondering if there are some hidden and/or hardcoded CTs. I'll try browse the sourcecode ASAP.