Hi everyone on the group. I am trying to run allstar link using raspbian-jessie-lite with ALS on a Pi Zero W. I edited the config files to run it first as a radioless HUB and second as a simpleusb node. Everything look fine and I can use the iaxrpt application but when I try to run it with a URI interface the heart beat LED do not flash. It only get a steady green light. I think data is not going through. Do I need to use a powered usb hub or I am missing something else? Any thoughts 73 Alberto (KP4AP) ________________________________ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of app_rpt-users-request@lists.allstarlink.org <app_rpt-users-request@lists.allstarlink.org> Sent: Wednesday, November 29, 2017 1:00 PM To: app_rpt-users@lists.allstarlink.org Subject: App_rpt-users Digest, Vol 105, Issue 26 Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users App_rpt-users Info Page - AllStar Link<http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> lists.allstarlink.org This list is for users of the app_rpt.c Asterisk application, the Debian Install (for) Allstar Link (DIAL) This site is dedicated to the memory of Jim Dixon WB6NIL or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Re: Using DSP on Rasberry Pi? (John Griffith) 2. Re: Using DSP on Rasberry Pi? (John Griffith) 3. Re: Using DSP on Rasberry Pi? (Mark Johnston) 4. Re: Using DSP on Rasberry Pi? (John Griffith) 5. Re: DIAL 8.5 and VM's on ProxMox (Will Bashlor) 6. Re: Using DSP on Rasberry Pi? (John Griffith) 7. Re: Using DSP on Rasberry Pi? (John Griffith) 8. Re: Using DSP on Rasberry Pi? (John Griffith) 9. Re: Using DSP on Rasberry Pi? (David McGough) 10. Re: Using DSP on Rasberry Pi? (John Griffith) 11. Re: Using DSP on Rasberry Pi? (John Griffith) 12. Re: DIAL 8.5 and VM's on ProxMox (Benjamin Naber) 13. How does Allstarlink work? (Benjamin Naber) 14. Re: How does Allstarlink work? (Steve Zingman) 15. Re: DIAL 8.5 and VM's on ProxMox (David McGough) ---------------------------------------------------------------------- Message: 1 Date: Tue, 28 Nov 2017 10:43:36 -0700 From: "John Griffith" <jcarl.griffith@gmail.com> Cc: <App_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Using DSP on Rasberry Pi? Message-ID: <057101d36870$6b983780$42c8a680$@gmail.com> Content-Type: text/plain; charset="us-ascii" I responded to Dave, but not the board, here it is again. The receive radio is a TYT TH-9000. The transmit radio is a Yaesu ft-7800. I found the 9000 has a more sensitive receiver, and the Yaesu has a better transmitter, it doesn't "crackle" During long transmissions like the TYT did. I'm using a standard URI. -----Original Message----- From: David McGough [mailto:kb4fxc@inttek.net] Sent: Tuesday, November 28, 2017 9:51 AM To: John Griffith <jcarl.griffith@gmail.com> Subject: Re: [App_rpt-users] Using DSP on Rasberry Pi? Hi John, What kind of radios(s) or repeater are you using? As the software developer of the hamvoip release, I'm interested to hear experiences, good or bad. Thanks, 73, David KB4FXC On Tue, 28 Nov 2017, John Griffith wrote:
About 4 months ago, I loaded Crompton on my Pi and transferred all the config files over from my ACID box.
My current repeater uses ACID on an old fanless PC, and it happens to also have DSP configured for receive. The Pi 3 actually worked well, my Pi 3 handling the extra load from using DSP quite well. What broke however, was everything else. I had copied quite a bit over to get it to work, not just conf files. It's been a while, I don't remember exactly what all I copied over, but it was entire directories. Then, it was no longer able to run USB tune or even the new features that replaced it because the conf files are not compatible with the new system. I went back to my old ACID installation on my PC after hopelessly breaking my Crompton attempt. Fast forward to now. I have my repeater running off a solar panel, but the computer is too big a draw to keep the system running over night. I want to return to a Pi installation. I've tried configuring COS from the radio, but it has a nasty habit of not going out of COS once a received signal terminates. I REALLY want to use DSP as I've spent countless hours trying to make COS work properly and not achieving good success. Is there a way of making DSP work on a Pi without breaking stuff? Or is there a proper way of bringing my ACID setup over to my Pi successfully? Not even looked at DIAL, is it compatible with DSP, if it is, can it be brought over to Pi? John N7OKN _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 2 Date: Tue, 28 Nov 2017 10:47:00 -0700 From: "John Griffith" <jcarl.griffith@gmail.com> Cc: <App_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Using DSP on Rasberry Pi? Message-ID: <057a01d36870$e560f980$b022ec80$@gmail.com> Content-Type: text/plain; charset="utf-8" I’m responding again because I realized I didn’t respond to the board as well. Thank you Dave. I may need your expertise. My goal is to try again with the Pi, using DSP, without breaking Crompton (or any other distribution, I don’t care which one is used) features. I know DSP can work on a Pi, as I had great success discussed before, but I never could get telemetry and other stuff working as so many things were mismatched. From: Dave P [mailto:tdydave@gmail.com] Sent: Tuesday, November 28, 2017 10:31 AM To: jcarl.griffith@gmail.com; Jim Pilgram <jim.pilgram@gmail.com> Subject: Fwd: [App_rpt-users] Using DSP on Rasberry Pi? Greetings John, I pulled this off the reflector to provide local support. I'm over here in Queen Creek and I've built a number of RaspBerry PI2 & 3 using Crompton's build. Jim NH6HI and a couple others run the Hawaiian Mainland Allstarlink Network (here is our website: http://wh6av.org/am2.html) My node is in a Data Center in SFO 28508 and I have simplex node on 220 in Queen creek in a dummy load. I'd be glad to see your system. What is the make and model of the repeater? Are u using a separate controller or are you using the RPI3 as the controller? We use simpleUSB-Tune-Menu to adjust the audio. I used to run ACID back in the day and found the new Crompton build to be the best. I'd be glad to help what I know. 73 and aloha Dave - AH6OD 28508/28387/27196 cell: 808-319-7092 home: 703-794-2111 ---------- Forwarded message ---------- From: John Griffith <jcarl.griffith@gmail.com <mailto:jcarl.griffith@gmail.com> > Date: Tue, Nov 28, 2017 at 9:03 AM Subject: [App_rpt-users] Using DSP on Rasberry Pi? To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> > About 4 months ago, I loaded Crompton on my Pi and transferred all the config files over from my ACID box. My current repeater uses ACID on an old fanless PC, and it happens to also have DSP configured for receive. The Pi 3 actually worked well, my Pi 3 handling the extra load from using DSP quite well. What broke however, was everything else. I had copied quite a bit over to get it to work, not just conf files. It's been a while, I don't remember exactly what all I copied over, but it was entire directories. Then, it was no longer able to run USB tune or even the new features that replaced it because the conf files are not compatible with the new system. I went back to my old ACID installation on my PC after hopelessly breaking my Crompton attempt. Fast forward to now. I have my repeater running off a solar panel, but the computer is too big a draw to keep the system running over night. I want to return to a Pi installation. I've tried configuring COS from the radio, but it has a nasty habit of not going out of COS once a received signal terminates. I REALLY want to use DSP as I've spent countless hours trying to make COS work properly and not achieving good success. Is there a way of making DSP work on a Pi without breaking stuff? Or is there a proper way of bringing my ACID setup over to my Pi successfully? Not even looked at DIAL, is it compatible with DSP, if it is, can it be brought over to Pi? John N7OKN _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.