11 Mar
2010
11 Mar
'10
1:21 p.m.
Hi,
mhz band is mostly 12k5 equipment these days... It did work.. However.. in general The audio pickup point in the discriminator chain has more to do with getting enough white noise I think.. I had to play around some in the 900 gear but found points suitable for either distro..
Please note that this is a commercial grade radio, no searching for a discriminator tap, but using the flat out that is provided by the manufacturer. Those radios should remain exchangable without modifying them, so this is not really an option :-) I will definetely not start soldering thin wires into my repeater radios, as I rely on direct replacement with a brand new radio in case of failure.
Doug KD8B
With best regards Ralph.