Is there a way to debug the scheduler and see what it's state is? I can't find any debugging commands. I have a very simple configuration setup to play an announcement with macro 10 and it works via testing it as *510 in the cli, but it does not work via scheduler. Anyone have any ideas? [42032] rxchannel = DAHDI/2 ; 927.050 Rx audio/signalling channel erxgain=-12 ; Echolink receive gain adjustment etxgain=-3 ; Echolink transmit gain adjustment duplex=2 ;controlstates=controlstates ; system control state list scheduler=schedule-42032 ; scheduler entries functions=functions ; Repeater Function Table phone_functions=functions ; Repeater Function Table link_functions=functions ; Link Function Table telemetry=telemetry ; Telemetry descriptions wait_times=wait-times ; Wait times macro=macro context = radio ; dialing context for phone callerid = "Repeater" <7278675309> ; callerid for phone calls idrecording = |iW9CR/R ; id recording or morse string accountcode=RADIO ; account code (optional) hangtime=3000 ; squelch tail hang time (in ms) althangtime=6000 ; longer squelch tail totime=180000 ; transmit time-out time (in ms) idtime=540000 ; id interval time (in ms) (optional) politeid=30000 ; time in milliseconds idtalkover=none ; Talkover ID (optional) default is unlinkedct=ct4 ; unlinked courtesy tone remotect=ct3 ; remote linked courtesy tone linkunkeyct=ct8 ; sent when a transmission received nolocallinkct=1 ; Send unlinkedct instead if eannmode=2 telemdefault=2 ;Local Telemetey beaconing=1 [functions] 820 = localplay,/etc/asterisk/audio/FSG-Repeater-system [macro] 10 = *820# [schedule-42032] ;every 2nd minute past the 8, 11, 14, 17, 20 and 23rd hour 10 = 02 8-23/3 * * * 73's -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net