Any motorboating issues? Sent from my iPhone On Jul 31, 2011, at 1:21 PM, "George Csahanin" <george@dyb.com> wrote:
So far built 3 on Intel D945GCLF2 boards, PicoPSU power supplies, both Limey off a CF and Acid off disk
Use CM108 $6.96 USB sounds FOBs. Brought PTT out of one of them, the others use printer port for PTT, and all use software squelch and ctcss decode.
GeorgeC
----- Original Message ----- From: "John Heron" <jh0932@gmail.com> To: "'Lu Vencl'" <vencl@att.net>; "'Michael Carey'" <michaelcarey@internode.on.net>; "'app_rpt mailing list'" <app_rpt-users@ohnosec.org> Sent: Sunday, July 31, 2011 9:25 AM Subject: Re: [App_rpt-users] Culling Linux Services (ACID)
It begs the question on what hardware really works 100% and what does not. I ran into this years ago running a global pactor III network and finally had to goto a acceptable hardware list as some hardware came real close to being fully compatible but would sporadically do weird things for no apparent reason... a bad thing when the box is in remote jungle locations... It boils down to who has had the least amount of issues with motherboard a vs. b and so on...
I am looking at small micro ATX form factors for example... anybody have suggestions for a inexpensive repeatable reliable solution?
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Lu Vencl Sent: Sunday, July 31, 2011 9:44 AM To: 'Michael Carey'; 'app_rpt mailing list' Subject: Re: [App_rpt-users] Culling Linux Services (ACID)
Michael, I still have not figured out what causes this issue. I have tried adding two different NEC chipset USB PCI boards and that made it much worse on my ASUS mother boards. I believe I have pretty much exhausted all options at this point. I just don't know why all 8 of my boxes 2.8 GHZ (all Asus) do this. I went to slower boxes (even down to 400 Mhz) and I don't get this issue.. Go figure. There has to be some other underlying issue where perhaps and interrupt is being messed with or some other issue. I just can't pin it down. I am working out a trade for some slower boxes in exchange for these machines as a solution for now. Sorry I wish I had a better answer. Lu KA4EPS
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Michael Carey Sent: Sunday, July 31, 2011 7:00 AM To: app_rpt mailing list Subject: [App_rpt-users] Culling Linux Services (ACID)
Hi Everybody,
In an effort to make node 27871 a lean, mean, fighting machine... I'm trying to keep things neat and tidy by stopping any services that have no direct impact on the operation of the node.
I'm after input on what others have done on their own AllStarLink nodes.
I have done a similar thing on my Icom G2 D-Star gateway... going through and disabling services (like bluetooth, VNC, smartcard, IPv6, etc).
On a side note, has anyone found a definitive cause for the occasional motorboating/stuttering audio when an AllStarNode transmits? I have another machine that I can use, but I would like to know what causes it and how it can be eliminated or reduced. This is the only thing that has marred an otherwise perfect experience with my AllStarLink node.
Michael. VK5ZEA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users