16 Jul
2019
16 Jul
'19
2:43 a.m.
On 7/15/19 10:32 PM, Darrell Black wrote:
I have a node behind my NAT router (50026): 192.168.1.250 port 4569 allstar port 5198-5200 echolink port 5201 supermon The above all works!!! The echolink and allstar can accept connections from outside
https://wiki.allstarlink.org/wiki/Two_Servers_Behind_NAT_Router You have to configure each node for the other's node number in the [nodes] stanza. This is due to the IP for your nodes in extnodes being the public IP. This means node 49267 will try to connect to the public IP for 50026. You need to set this up so it knows the direct private IP connection. Technically some routers can be configured to permit this, but most don't. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net