For the Pi I would suggest just using the I/O pins on the board rather than a USB thingie :-) Steven Donegan KK6IVC General Class FCC License FAA PP-ASEL Pilots License Silver State Car #86 www.sscc.us From: Steve Zingman <szingman@msgstor.com> To: app_rpt-users@lists.allstarlink.org Sent: Thursday, February 23, 2017 10:23 AM Subject: Re: [App_rpt-users] parallel port use George, The current version supports the printer port for signaling. From what I've seen in the code I REALLY doubt a USB to PP adapter will work. What I've added to the GitHub issues area is the request to support a serial port for signaling (COS, CTCSS, PTT) Everyone needs to understand that my adding it to the issues area does not in any way mean it will happen. I want to document the requests so they are visible to all. If someone wants to take on the feature and write it, the code team will vet it like any other addition. Again this does not mean it would make it into the distribution. But at that point it would be available to someone that wanted to play with it. 73, Steve N4IRS On 2/23/2017 1:14 PM, George Csahanin wrote:
Steve, is this not in the current distro? I assumed that it was the same source as whet Jim wrote. Or maybe what you mean is to have it now wiggle lines on the serial port, that's outstanding. At any rate, I'm a big fan of the method as any CM108/119, etc US fob can be used. Interface is a 2N2907, etc. So I also standardized on the D945 Intel board (that decision goes back to limey linux) D945GLLY, if I remember correctly. Has a printer port DB25.
The Pi is surely smaller. Has anyone ever tried the parallel port interface using one of the USB<--->DB25 adapt-a-trons to see if that would work?
GeorgeC W2DB 2360
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.