Sounds like you have duplex set on both the 210 and the node. You'd want to run in duplex mode 0 (zero) on the allstar node and specify the linktolink parameter See http://ohnosec.org/drupal/node/88 and http://ohnosec.org/drupal/node/84 It's been a while since I've worked with the RC210, it's actually sitting right next to me on the shelf as I let my allstar node do all the work and retired the 210. You'd probably want to set the "allstar" port on the 210 to not repeat. See the RC210 manual in the Repeating/Non-Repeating Operation section. de K0JSC On Mon, Aug 31, 2015 at 4:30 PM, Poellnitz, Brian <bpoellnitz@apr.org> wrote:
I currently have ACID installed and running with a DMK URIx. As far as I can tell, all pinouts and connections are correct. The URI is connected to a port of my RC210 controller. For some reason, audio thru the system sounds echo-ey, as if the audio is being slightly delayed and fed back into the transmitter. I’m sure this is a config option that I have set incorrectly. Haven’t been at this long enough to really know what I’m up to.
Any insight would be most appreciated.
==================================== Brian Poellnitz, CBRE, CBT, A+, Net+
-Operations Manager: Alabama Public Radio Chief Operator: WUAL 91.5, WQPR 88.7, WAPR 88.3 FM, WHIL-FM 91.3 http://www.apr.org
205-348-8026 (Desk) 205-348-6644 (Main Ofc) 205-348-8024 (Fax) bpoellnitz@apr.org
N4BWP ====================================
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.