Skyler, only one though/advice if it helps... If I understand your problem correctly... While I have not yet tried a install of DIAL, During the beginning of the OS install, you should be presented with a option of manual driver install.(options) Try installing your Raid drivers manually. You might make sure that the chipset is properly recognized and drivers for it are loaded. Then try the raid driver. Likely there may be 2 versions w&wo raid. The raid driver probably will not load without proper chipset interface drivers. The right driver may even include them. Just a place to start. ...mike/kb8jnm
The manual install is not working, and my RAID is not working either.
I plug in the URI and it flashes a few times and then is steady. Radio-tune-menu then does not work. The manual install also made my ethernet stop working so I had to go into a network conf file and add it back.
RAID 1 is not working either. I physically unplug a hard drive and boot it, and I get a bunch of errors.
CentOS plays a l o t better with RAID 1. ACID was previously installed and had no problem with the hardware raid.
Any suggestions of what to try next? I have tried N4IRS's script as well as W0JRL's debian install, none of them work. Right now I just disabled RAID and am installing DIAL on one of the disks, but I still want to use both so if one fails at the site.
How does one copy kernel modules to get the raid working?
This is server hardware.
On Sun, Dec 13, 2015 at 3:08 PM, Shamim Shahriar <shamim.shahriar@gmail.com> wrote:
On 13/12/2015 18:49, Skyler F wrote:
Does anybody have or know where there are scripts to install AllStar from Debian.
For a setup for a repeater site am using a server computer with two hard drives in a RAID1 configuration so if one is to fail on this 10 year old machine, it will still work.
I was not able to get DIAL installed but was able to get Debian to work.
Thanks Skyler KD0WHB
Hi Skyler, this might not be an ideal solution, and you might have already tried it. In cases like this , I have always found that that installing the system on a known working system, later DD-ing the disc image and booting into single user mode and fixing things so that reflects the new hardware can also be an option. If the kernel versions are the same, you might even be able to just copy over the kernel modules required to have the raid working or other issues resolved. Have you considered this option?
Hope this helps All the best.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDÃWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.