Need more info... What are you trying to connect to ? a node behind your nat but on a different server? a node on the same server? a external node outside of your nat? You probably need to define more info for other nodes behind your nat but on other servers. Specifying the ip & port used in rpt.conf of the other servers "if" that is the case. 29283 = radio@127.0.0.1/29283,NONE 29999 = radio@192.168.1.223:4570/29999,NONE ;<<<<<<<<<<<<<<< The line above shows the ip and port used of the other server inside of nat. the top line is a node local to the box/server. You would need to do this in each box behind your nat with proper ip/port to connect between them. ...mike/kb8jnm
Good afternoon all, I have two nodes on my internal network. both on the same subnet. for the past 16 hours if I look at either node that show state as "Connecting" and not connected .
Any thoughts ? I tried it once from one node running a script and before I went to bed last night I tried it from the other side.
Mike AE4ML
--
*"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan* _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.